Pairing the Soundpeats QY7 with an iPhone is a fairly straightforward process and can be done in a few steps.
First you need to turn on the Bluetooth function on your phone. For iPhone 5 and later models, pull up the Control Center interface by swiping upwards from the bottom edge of the screen. Then, press the Bluetooth icon.
For iPhone 4S and earlier models, unlock your phone and launch the Settings app, then select Bluetooth.
Once Bluetooth has been enabled, open the Bluetooth settings menu from within the Control Center on newer models or from within the Settings app on older models. Your Soundpeats QY7 headphones should be listed and appear as “QY7-0000001” or with a similar name.
Select this device to connect.
You may also need to pair the headphones with your device manually by turning on the headset’s Bluetooth. To do this, press and hold the Multi-function Button for about three seconds and then slide the switch to the “ON” position.
Once powered on, the headphones will appear in the list of nearby Bluetooth devices.
After you have successfully paired the headphones with your iPhone, you should be ready to start listening to your favorite music or audio. Enjoy!
How do I pair my qy7 Bluetooth headphones?
Pairing your Mpow QY7 Bluetooth headphones is a relatively straightforward process.
1. Make sure your headphones are turned off. Usually, you can do this by pressing the “power” button down for several seconds.
2. Press the “power” button until you see the light indicator start flashing. The indicator will alternate between red and blue light. This indicates that the headphones are in pairing mode.
3. Open the Bluetooth menu on your device.
4. Look for the option that says “Pair New Device.”
5. Select “QY7” and then enter the pairing code that is displayed on the headphones.
6. Once you enter the code, the headphones and your device should be connected.
7. You will typically hear a sound confirming the connection.
That’s it! Now you can enjoy the superior sound quality of the QY7 Bluetooth headphones.
How do I put SoundPEATS in pairing mode?
In order to put your SoundPEATS headphones into pairing mode, you’ll need to follow a few simple steps.
First, make sure that your headphones are powered off. If they are powered on, press the middle button on the right earpiece for 3 seconds, until the blue light flashes quickly and the voice prompt says “Ready to pair”.
Next, locate the Bluetooth setting on your device and select your SoundPEATS headphones from the list of available devices. Depending on your device, it may have the SoundPEATS headphones already listed as “AirPods” or “SP-Q12”.
If that is the case, select it.
Once you have completed these steps, your SoundPEATS headphones will now be in pairing mode. You can now go ahead and enjoy your music and take calls with your SoundPEATS headphones.
Is SOUNDPEATS compatible with iPhone?
Yes, SOUNDPEATS products are compatible with iPhone devices. Specifically, their headphones and earbuds work with both iPhones and iPads. They use Bluetooth 5. 0 technology, which allows them to pair with a variety of Apple devices, as well as Android ones.
Additionally, you can use their free app to customize the sound of your headphones to get the most out of them. This app is compatible with iPhone, iPad and iPod touch devices running iOS 10. 0 and later.
Why are my SOUNDPEATS not connecting?
Most commonly, it is caused by a communication issue between the device and the Bluetooth receiver. First, make sure your device is compatible with the SOUNDPEATS. Then try power cycling the device and SOUNDPEATS.
If that doesn’t work, try deleting the SOUNDPEATS from the Bluetooth list and re-pairing them. Additionally, it could be a technical issue with the device itself. If your device has a removable battery, try taking it out and re-installing.
It might also help to check your device settings or update the SOUNDPEATS drivers if they are outdated.
How do you reset the Soundpeats wireless earbuds Bluetooth?
Resetting the Bluetooth connection on Soundpeats wireless earbuds is relatively simple. Start by first turning off the earbuds. Once the earbuds are off, remove them from your device’s list of connected Bluetooth devices.
On your device, navigate to the Bluetooth settings, find the Soundpeats earbuds, and select “Forget”. This will remove the earbuds from your device’s Bluetooth memory Bank. Next, turn on the earbuds again, and enter Bluetooth pairing mode.
On your device, navigate to the Bluetooth settings menu and select the Soundpeats earbuds when they appear on the list. Once the connection is established, you will hear an audible confirmation from the earbuds.
Congratulations, you have now successfully reset your Soundpeats Bluetooth connection.
How do I connect my iphone 13 to Soundpeats?
To connect your iPhone 13 to your Soundpeats device, you will need to first make sure your Soundpeats device is powered on and within Bluetooth range. You should then open the Settings application on your iPhone 13 and tap on the Bluetooth option.
You will then see a list of available Bluetooth devices; you should look for and select your Soundpeats device. Your iPhone 13 will then attempt to connect to the Soundpeats device and once the pairing is complete, you should be able to hear audio through the Soundpeats device.
If you have any trouble connecting your Soundpeats device to your iPhone 13, you should refer to the device’s user manual for instructions on pairing and technical support.
How do I reset my Q12 earbuds?
To reset your Q12 earbuds, you’ll need to follow these steps:
1. Unplug the charging cable from your Q12 earbuds.
2. Press and hold the multi-function button on the left earbud for 15 seconds.
3. Release the button and red and blue LED lights will flash.
4. Press and hold the multi-function button on the right earbud for 15 more seconds.
5. Release the button and the LED lights will flash.
6. Hold down both the left and right multi-function buttons simultaneously for another 10 seconds.
7. Repeat Step 6 until the LED lights flash three times.
Your Q12 earbuds are now reset and ready to be set up again. During setup you’ll need to make sure the earbuds are near your device, as they will need to establish a Bluetooth connection. Also make sure that Bluetooth is enabled on your device.
Once connected, you’re ready to enjoy your music or calls.
Is there an app for Soundpeats earbuds?
Yes, there is an app for Soundpeats earbuds. It is called Soundpeats Connect. The app is available for both Android and iOS devices. It allows you to customize and control your Soundpeats earbuds. You can adjust the equalizer settings to customize your sound experience, as well as control the touch controls on your earbuds.
The app also allows you to track and check the battery life of your earbuds, and helps you find them if ever lost. Along with that, the app also helps you stay up-to-date with software updates and keep your earbuds in top shape.
How do I reset my earbuds to factory settings?
If you want to reset your earbuds to the factory settings, you will need to connect them to a device. Use the appropriate cable that came with the pair of earbuds. Once connected, hold down both the volume up and down controls for 8 seconds.
This will initiate a reset process and the lights on the earbuds will flash. This can take up to 1 minute to complete. Once the reset is complete, all settings, including the Bluetooth connection will be reset to the factory settings.
Make sure to reconnect the earbuds to your device afterwards.
Why is my Soundpeats flashing red?
If your Soundpeats headphones are flashing red, this could be due to a few different issues. Firstly, it could mean that you’re running low on battery and need to charge them. Make sure you’re using the right charging cable, which should have come with your headphones.
If the red light continues to flash after charging, it may be an indication of a technical issue. It’s worth trying to reset your headphones by holding the power button for 10 seconds. If that doesn’t work, it might be worth reaching out to the company you purchased them from in case your headphones are faulty and need a repair or replacement.
Where is the multifunction button on Soundpeats?
The multifunction button on Soundpeats headphones is typically located on the right ear cup, but this may vary depending on the exact model. It is typically an oval-shaped button with an icon printed on it, such as an arrow pointing up/down, a play/pause button, or a phone receiver symbol.
The button is used to control power, phone calls, and music playback. To operate the multifunction button, press and hold for 2 seconds to power on the headphones, or press and hold for 3 seconds to power off.
The button can also be pressed briefly to answer or end a phone call, or to play/pause music.