The best way to clean your OtterBox case is to start by wiping it down with a damp microfiber cloth to remove any dust or dirt. Once the case is dust and dirt free, a mild soap and water solution can be used to clean any stains or dirt that remains on the case.
Be sure to not scrub too hard, and only use a gentle circular motion with the cloth or sponge. Finally, rinse off any remaining soap solution and dry with a dry microfiber cloth. You may also use a mix of distilled water and rubbing alcohol to clean the case and ensure any remaining dirt is fully removed.
Allow the case to dry before reassembling it.
How do you clean the rubber part of an OtterBox?
To clean the rubber part of an OtterBox, start by using a clean, soft cloth and a small amount of isopropyl alcohol (IPA) or an alcohol-based antiseptic wipe to wipe away any dirt, debris, or oils on the rubber surface.
You may also use a mixture of detergent and warm water, however it should be diluted to keep from leaving a residue on the case.
Once you have wiped away any residual dirt, use a soft toothbrush to gently scrub away any small stubborn particles that the cloth or wipes did not remove.
Next, allow the case to air dry, taking care to avoid direct sunlight, which may cause the material to fade or discolor over time.
Once the case is dry, consider applying a protective finish to the rubber area in order to help keep it looking and feeling like new. Like spray-on protectants and UV protectors. Be sure to follow package instructions when applying.
Finally, when cleaning the rubber, take care to avoid harsh chemicals and abrasive materials, as these can damage or weaken the rubber over time.
Can I wash my OtterBox in the dishwasher?
No, you should never wash any OtterBox product (or any device and accessories) in the dishwasher. Doing so can cause damage to the product, and OtterBox products are not designed to withstand water or high temperatures.
To clean an OtterBox product, use a damp cloth or mild household cleaner and rinse with a damp cloth. General everyday dirt and debris can be removed with a soft cloth as often as needed. Cleaning with any kind of abrasive material, such as a scrubbing pad, can cause damage and should be avoided.
Additionally, solvents, alcohol-based cleaners, or harsh cleaners of any kind should not be used as they may cause damage or discoloration.
How do you get dirt out of a rubber phone case?
If you have a rubber phone case that has gotten dirt in it, there are a few simple steps you can take to get it clean. The first is to gently wipe the dirt off with a damp cloth. It is important to use a damp cloth rather than a wet one so that the dirt isn’t further smeared into the rubber.
If that doesn’t work, you can try rubbing alcohol or a dilute solution of dish soap and water on a cloth and gently rubbing the dirt off. Additionally, a small amount of baking soda sprinkled onto the damp cloth and then gently wiping at the dirt can also do the trick.
If you have an oil-based stain on the rubber, you can use cornstarch or baking soda to absorb it before wiping it off. For tougher dirt, scrubbing the rubber with a toothbrush can be effective. It’s important to be gentle when doing this in order to not damage the rubber phone case.
Can OtterBox cases get wet?
Yes, most OtterBox cases are water resistant and even waterproof. They are designed to protect devices from all torrential conditions including liquid spills, rain, and extreme temperatures. However, it is important to note that OtterBox cases are not designed for underwater use and should not be submerged for extended periods of time.
To offer the most protection, OtterBox suggests applying the included built-in port covers for additional security and a more complete waterproof seal. Additionally, their cases are designed to protect devices from dust and other particles, providing defense from dirt, sand, and more.
Is OtterBox rubber or silicone?
OtterBox cases are made with a synthetic rubber material known as thermoplastic polyurethane (TPU). This material is similar in composition and characteristics to silicone, with added benefits. It has a higher resistance to UV light, is also highly resistant to grease, abrasion, and puncture, and has good elasticity for a better grip.
TPU is a great material for cases because it offers the same protective attributes of silicone, with added durability and a more secure grip.
How long should an OtterBox last?
The longevity of an OtterBox largely depends on how frequently and how well it is used. When used properly and with reasonable frequency, an OtterBox can last anywhere from two to three years. However, improper use or excessive use can significantly decrease the lifetime of the product.
As an extra measure of protection and to help it last longer, it is recommended that users take extra care when using the product and avoid dropping it or subjecting it to harsh conditions. Additionally, cleaning the OtterBox on a regular basis using a damp cloth or a soft brush will help it maintain its longevity and condition for longer.
What OtterBox series is waterproof?
The OtterBox Armor Series is the most waterproof series of cases offered by OtterBox. This series of cases features a rugged two-part design that is waterproof up to 6. 6 feet (2 meters) for up to 30 minutes.
The Armor Series also offers a shockproof case that meets or exceeds MIL-STD 810G standards for protection against drops up to 4 feet (1. 2 meters). The cases also feature a port cover to keep dirt and dust out, as well as a built-in screen protector for extra durability.
The Armor Series comes in a variety of sizes and colors to fit your device and personal style.
How deep is OtterBox waterproof?
OtterBox offers both waterproof and water resistant cases depending on the phone make and model. The waterproof cases are rated to IP-68, which means they are protected against submersion in up to 6.
6 feet (2 meters) of water for up to 1 hour. Additionally, the cases are dust-proof, dirt-proof and snow-proof, to provide even more protection against the elements.
Can Otterboxes go underwater?
No, Otterboxes are not designed to go underwater. While they do provide excellent protection against bumps, drops, and impacts, they are not waterproof. Otterbox cases generally offer water resistance, but do not guarantee watertight protection.
Although Otterbox cases can withstand rain and splashes from liquids, they are not intended for submersion in water or for extended exposure to liquids. Therefore, it is not recommended to take Otterbox cases underwater.
Does an OtterBox protect your phone from water damage?
Yes, an OtterBox can protect your phone from water damage. The phone cases are designed with advanced technology to protect your device from splashes, rain, and snow. With an OtterBox phone case, you can enjoy outdoor activities, like a day on the beach or a pool excursion, without worrying about damaging your device.
The cases also have a port cover that helps keep water out of your ports and plugs. Not only do OtterBox cases protect from splashes and damp environments, they also provide the perfect amount of shock absorption.
With a solid three-layer defense system, OtterBox cases provide a secure fit for your device and protect against drops of up to 6. 6 ft. With the added screen protection, you can confidently use your device without worrying about scratches or scrapes.
Why is my OtterBox case turning yellow?
OtterBox cases are typically made of plastic materials that can change color over time. This is due to various factors, such as exposure to sunlight, oils from your pocket/hand, and the plastic breakdown, which can cause the plastic to react with various compounds in the air.
The yellowing of the plastic is actually oxidation and it’s a natural process that takes place over time. To slow this process down, you can make sure the case is wiped clean, kept out of direct sunlight, and stored away from other plastics and materials that may cause the yellowing to occur.
Additionally, investing in a screen protector may prolong the life of the case, as this will form a barrier between your phone and any other materials that may cause a reaction or color change.
How do I get the yellow off my Otterbox?
Otterbox cases are known for their durability and sturdiness, however they can also be prone to staining. If you find yourself with a yellow stain on your Otterbox case, there are a few things you can try to remove it.
First, you can try mixing up some warm water with dish soap. Apply the mixture to the stain and gently scrub with a cloth. Avoid using harsh scrubbing agents, such as steel wool, as they may damage the case beyond repair.
Rinse the area with a wet cloth when finished.
If the stain is still present after using soapy water, you may need to try using a more powerful cleaning agents. Try using a 50/50 mix of white vinegar and water and apply it to the stain. Let it sit for 10-15 minutes, then scrub gently with a wet cloth.
Rinse the area and let it air dry.
If the stain is still present, you might need to use a gently abrasive cleaner. Try mixing baking soda and water until it forms a paste, then apply it to the stain. Gently scrub the area in circular motions and rinse it off.
Allow the case to air dry.
If none of these methods works or you’re still having trouble getting the yellow stain out of you Otterbox, then you may need to contact Otterbox customer service. They may be able to provide advice or assistance in getting the stain off your case.
How do I make sure clear case doesn’t turn yellow?
In order to ensure that your clear case doesn’t turn yellow, there are a few things you should do. First, make sure it’s stored in a place that isn’t exposed to direct sunlight. This will help prevent any discoloration from happening.
You should also clean your clear case regularly with a mild detergent and warm water. Avoid using any harsh chemicals in order to prevent any damage. Lastly, you should make sure that your clear case is properly dried before being stored.
All these steps will help ensure that your clear case stays looking as good as new.
How do I make my OtterBox clear again?
If your Otterbox case is looking a bit dull and its original clarity has faded, there are several things you can do to restore it back to its like-new condition. The first thing to do is to make sure the case is completely dry and has no moisture trapped inside.
Moisture can quickly break down the plastic and make your Otterbox look old and faded.
Next, you can try using warm soapy water to clean the case. Using a soft cloth and warm water – with a bit of dish soap pH-neutral soap – gently scrub at the outside of the case until you can’t see any dirt or grime.
Make sure not to use an abrasive material, as this can scratch the surface of the Otterbox and harm its clarity.
Once the case is clean, you can dive a bit deeper into the cleaning process. If the outside of the case still looks dull, you can try buffing it with a polishing cloth. To do this, dampen the cloth with distilled water and apply a small amount of toothpaste to the cloth.
Use small circular motions to gently rub the cloth across the case until it’s clean and has a glossy shine to it.
Finally, you can use a hairdryer to dry the case, as this will help the plastic regain its original clarity. Make sure to space the dryer several inches away to avoid burning or melting the case. After you’re done, you should have a like-new Otterbox that’s good as new.