It is possible that your Elgato hd60s is not receiving any signal because of several different factors. First, make sure that the connection between your Elgato hd60s and the device sending the signal (such as a gaming console or a computer) is secure.
Another possible reason is that the Elgato hd60s isn’t correctly set up. Ensure that all the apps and software associated with the Elgato hd60s is installed and updated. If you are using multiple monitors with your Elgato hd60s, make sure all the monitors are switched on.
You can also try plugging the Elgato hd60s into a different HDMI port or directly into the device that is sending the signal, as this might resolve the issue. If all of the above fails, try resetting the Elgato hd60s.
To do this, first unplug any cables connected to the Elgato hd60s and power down the device, then press and hold the reset button on the back of the device for 30 seconds and then re-connect everything.
How do I fix no signal on my Elgato capture card?
If you’re receiving a “No Signal” error on your Elgato Capture Card, it could be caused by a few issues. To help troubleshoot the issue, start with the following steps:
1. Make sure the capture card is properly inserted into the PCI-e slot on your computer. Install any included drivers, if necessary.
2. Check all your connections between the game systems and the capture card. Ensure that the cables are properly plugged into their ports.
3. Check the cables and ports for any damage, such as bent pins or fraying wires. Replace any damaged cables or ports.
4. Reboot your PC and the game systems.
5. Try uninstalling and reinstalling the capture card’s driver, if applicable.
6. Try different HDMI cables to check for signal compatibility.
If you’re still experiencing signal issues after trying these steps, you may need to contact Elgato Support directly, provide information on your setup, and see what other solutions they can offer.
Why is my Elgato hd60s not working?
If your Elgato HD60s is not working, there are a few things you can try to resolve the issue. First, make sure that your Elgato HD60s is properly connected to your computer and console. Connect the HDMI cable from your console into the “in” port on the back of the Elgato HD60s, then connect the USB cable from the Elgato HD60s into an available USB port on your computer.
Next, ensure that the PlayStation 4 Pro, Xbox One X and Xbox One S are all set to output a signal at 1080p60 for the Elgato HD60s to be able to capture. On the console settings, switch the output resolution to 1080p60.
You can refer to your console’s manual for further instructions.
If you are still encountering issues capturing, you can try troubleshooting with the Elgato HD60s setup assistant. This will allow you to quickly verify settings and connections and make sure everything is set up correctly.
Furthermore, if you encounter issues with your Elgato HD60s after troubleshooting with the setup assistant, you may want to reach out to Elgato’s technical support team for further assistance.
Is Elgato HD60S still good?
Yes, the Elgato HD60S is still a great device. It’s an easy-to-use, plug-and-play game capture card that lets you stream, record, and share your gaming experiences on YouTube, Twitch, and other social media platforms.
With high-definition 1080p quality audio/video capture, and onboard Live Streaming features, the HD60S is capable of handling a wide range of media sources and can help you get your gaming streams off the ground.
It also provides low-latency streaming so you can play with minimal input lag, making it ideal for tournament play. Additionally, if you’re looking to take your live streaming to the next level, the HD60S gives you the ability to use software like OBS or Xsplit to customize your streams as desired.
All in all, the Elgato HD60S is still a great device for those who want to set up their own gaming streams.
Do you need USB 3.0 for Elgato HD60S?
Yes, you do need USB 3. 0 for an Elgato HD60S. This is because the Elgato HD60S requires a Type-A USB 3. 0 or greater port with an available USB 3. 0 connection. This is necessary to capture and stream video content at a resolution of 1080p at 60 FPS and higher.
USB 3. 0 is also required to ensure stable performance and avoid potential audio or video quality issues. Additionally, if you are intending to stream your content, you will also need an internet connection with an upload speed of at least 3.
What does it mean when the Elgato HD60 S flashes red?
When the Elgato HD60 S flashes red, it may indicate one of several possible issues. First, it could mean that the Elgato HD60 S hardware is not properly connected or has a hardware issue. It could also indicate a problem with the settings on the device, such as incorrect resolution or incorrect input settings.
Lastly, it could be an issue with the software, such as an outdated driver or a conflict between applications. In any case, it is best to check all connections and settings if the Elgato HD60 S is flashing red.
If these checks do not resolve the issue, it may be necessary to reach out to Elgato support or take the device in for repairs.
How do I optimize my Elgato HD60 S?
Optimizing your Elgato HD60 S to get the best results involves making sure you have the necessary hardware and software requirements in place. First, you need to make sure you have a good gaming or streaming PC with sufficient memory and storage.
You also need a modern, compatible camera and monitor setup, as well as proper signal cables. Additionally, you should consider making sure your computer has the latest version of streaming software and the most up-to-date drivers for your Elgato HD60 S.
This can ensure stable and smooth performance for your Elgato HD60 S recording and streaming.
Once you have the necessary hardware and software in place, you can optimize your Elgato HD60 S to produce optimal results by adjusting the recording and streaming settings to match the power of your machine and the content you’re producing.
This can be done by configuring the settings in your streaming and recording software to match the performance of your PC, such as setting the bitrate, resolution, and other settings. Additionally, you should make sure you have the proper microphone and headset setup and that they are properly connected to your computer.
Finally, it’s important to test and optimize the Elgato HD60 S and your streaming setup regularly to take advantage of any fixes or updates as they become available. This can help to ensure the performance of your streaming setup stays strong.
Is hd60s+ better than HD60 S?
The HD60s+ is the latest device available from Elgato, while the HD60s is slightly older. Both are excellent video capture devices, with the HD60s+ offering a few extra features which may be beneficial for certain circumstances.
The HD60s+ provides 4K capture resolution at 60 fps, while the HD60s supports 1080p capture at 60 fps. The HD60s+ also has a better streaming bitrate of up to 40 Mbps compared to the HD60s’ 20 Mbps. Additionally, the HD60’s+ has an adjustable time-shift function which allows you to rewind the feed and make sure you don’t miss any key moments.
The HD60s+ also supports a variety of streaming services (like Twitch, YouTube, and Facebook) and devices (like the Elgato Game Capture 4K60 Pro, PlayStation 4 and Xbox One). It also comes with an HDMI cable for easier setup and has a versatile Delay Mode which provides you with a quick solution for lowering the audio latency.
In conclusion, the HD60s+ offers some notable benefits over the older HD60s. While both devices offer excellent video capture capabilities, the HD60s+ provides a more comprehensive package with its enhanced features.
Do I need to use HDMI out on Elgato HD60 S?
No, you do not need to use HDMI out on Elgato HD60 S. The device has multiple inputs/outputs, including USB 3. 0, HDMI and also has an analog pass-through option, allowing you to use whatever connection you prefer for your setup.
Generally, it’s recommended to take advantage of the HDMI connection if you’re planning to broadcast or stream your content online. This will ensure the highest quality and consistency with your streams.
However, if you’re transmitting your signal locally, you can use any of the provided connections. HDMI will provide the best quality, but using one of the other connections can be suitable function, depending on your needs.
Why is my Elgato just showing a black screen?
The first is that the device is not powered on. Ensure that the power cable is plugged in securely and that the display is receiving power.
Another possibility is that the correct input source is not selected. Ensure that the correct input source–such as HDMI or Display port–is being used. On the device itself or on the connected monitor, check that the correct input source has been selected.
If the device is receiving power and the correct input source is selected, then the Elgato’s hardware may need to be checked. Ensure all cables are securely connected and in good condition. If they are, you may need to contact Elgato support for further help.
Why won’t OBS recognize my Elgato?
This is a common issue that can be caused by a number of different factors. OBS may not recognize your Elgato for a few reasons:
1. Insufficient Hardware Requirements: OBS requires a certain level of hardware in order to recognize input from Elgato devices. It is possible that your computer may not have the necessary hardware to allow OBS to recognize your Elgato.
You can look at the OBS System Requirements to make sure your computer meets the minimum requirements.
2. Outdated Drivers: OBS may not be recognizing your Elgato if its drivers are out of date. The Elgato website offers updates on your device’s drivers, and you may need to update them in order for OBS to recognize your device.
3. Missing Plugin/Incorrect Setup: OBS requires a certain plugin for Elgato devices to be correctly installed and configured. If this plugin is missing or not correctly configured, then OBS may have difficulty recognizing your Elgato.
4. Compatible Devices: Lastly, OBS may not be recognizing your Elgato if it’s not a compatible device. Elgato gaming devices often work best with OBS, and you can find a list of compatible Elgato devices on the OBS website.
If none of these solutions solve the issue, you can try uninstalling and reinstalling OBS, or contact Elgato support for further assistance.
Is Elgato supposed to light up?
Yes, Elgato is supposed to light up. Elgato is a line of audio-visual hardware produced by the company of the same name. Elgato’s hardware usually consists of various products such as video game capture cards, lighting systems and stream decks.
Depending on the product you have, Elgato hardware generally doesn’t only provide audio-visual capture capabilities, but also the ability to adjust its brightness and colour depending on the user’s preferences.
The Elgato Stream Deck, for example, comes with back-lit keys that can be customized to the user’s preferences. They also come with keys that light up when pressed, allowing the user to keep track of any settings or functions they have enabled at a glance.
The Elgato Key Light is an LED light that is mainly used by content creators to light up the space their recording or streaming area. It can be adjusted to different intensities, brightness and color temperatures to perfect the lighting of their scene.
Overall, Elgato products are indeed supposed to light up, depending on the product and application.
Do I plug my Elgato into my graphics card?
No, the Elgato does not need to be plugged into a graphics card. The Elgato Capture Card is a hardware device that allows you to capture video and audio from another device and stream it online or record it for later viewing.
It has its own powerful video engine with HDMI and USB inputs. The Elgato is simply connected to the source device via the HDMI cable, and then connected to the computer via USB. It is then ready for video and audio capture.
You do not need to plug it into a graphics card.
Why does my Elgato flash white then red?
Your Elgato may be flashing white, then red for a variety of reasons. If you encounter this issue, it could be one of the following:
1. Not Enough Power: This commonly occurs if your Elgato is not receiving enough power. One way to resolve this is to try a different USB port, preferably one that can provide more power.
2. No Signal: This issue usually occurs if your Elgato does not receive a video signal. This could be either due to a faulty connection or, if using a console, unsupported video format. To troubleshoot this, try a different cable or check whether your console is set to output in a supported format.
Ultimately, if your Elgato continues to flash from white to red, you should contact Elgato support for further assistance.
Why isn’t OBS detecting my capture card?
There can be a few different reasons why OBS may not be detecting your capture card. The most common cause of an OBS not detecting a capture card is due to an outdated device driver. If this is the case, you’ll need to locate and install the most up-to-date version of the driver for your capture card.
It’s also important to make sure that the correct input source is selected once the driver has been installed. For example, if your capture card uses HDMI, ensure that the OBS video input source is set to HDMI.
In some cases, OBS may not detect your capture card due to a hardware compatibility issue. To determine this, check the connection between your capture card and your computer to make sure that it is secure.
Furthermore, ensure that you are using an HDMI cable that is of high quality.
If the connection is secure and OBS still fails to detect your capture card, try a different HDMI port on your computer. It’s also a good idea to try disconnecting and reconnecting your capture card to make sure that all the connectors are seated properly.
If you have tried all the steps above and OBS still fails to detect your capture card, it may be due to a faulty or incompatible device. In this scenario, the only solution is to acquire a new capture card that is compatible with OBS.