First, make sure that the soundbar and subwoofer are both powered on, plugged into the same power source, and their audio cables are securely inserted into the correct audio slots. If the soundbar and subwoofer are still not connecting after verifying these connections, then a few other causes may be the root of the problem.
Many Onn soundbar models only support a specific frequency range, so make sure that the subwoofer is compatible with the same frequency range. If the subwoofer still isn’t connecting, then the soundbar may require a specific subwoofer type to be properly recognized.
If all else fails, the soundbar or subwoofer may need a firmware update, so be sure to check the manufacturer’s website for a software update.
Can you pair any soundbar with subwoofer?
Yes, you can pair any soundbar with a subwoofer, if the soundbar has a subwoofer output. This allows you to add the extra bass that a subwoofer can provide. The most important thing when pairing a soundbar with a subwoofer is to ensure that the soundbar is compatible with the subwoofer.
This means checking that the soundbar subwoofer output is compatible with the subwoofer’s input. Many soundbars are pre-packaged with specific subwoofers made by the manufacturer, so be sure to check compatibility before buying.
Once you have confirmed compatibility, you can easily connect the soundbar to the subwoofer using a standard audio cable.
How do I put my Onn soundbar in pairing mode?
In order to put your Onn soundbar in pairing mode, you need to first make sure that the soundbar is properly connected to your device and that all of the necessary cables are plugged in securely. Once you have established the connection, you need to press and hold the respective input button on your Onn soundbar for a few seconds.
Most Onn soundbars will have an LED indicator that will blink when the soundbar has entered into pairing mode. Once the LED indicator is blinking, you can then proceed to connect your device to the Onn soundbar.
Depending on the type of device that you are using, you may either need to press the pairing button on the Onn soundbar or locate the device on your Bluetooth settings and connect it to the Onn soundbar.
Once both the device and Onn soundbar are connected, your soundbar should now be successfully paired.
Can you connect subwoofer without remote?
Yes, you can connect a subwoofer without a remote. Depending on the type of sound system you have, there are a few different ways you can go about connecting your subwoofer without the need for a remote.
Most subwoofer units come with a power cable, an audio input cable, and a tether cable. First, you will need to plug the power cable into a wall outlet or an outlet on your sound system. Then you’ll need to connect the audio input to your sound system, either through an RCA cable, a 3.
5mm audio cable, or an optical cable. Finally, you will need to connect the tether cable from the subwoofer to the back of your sound system. Once all of the cables are connected, you will just need to turn on your sound system and adjust the settings accordingly.
If you are having trouble connecting the subwoofer to your sound system, there may be a Bluetooth option enabled, which will allow you to connect it wirelessly. Keep in mind that most subwoofers require a remote for customizing sound levels and other settings.
Why is my Onn subwoofer blinking blue?
The blue blinking light on your Onn subwoofer indicates that it is ready to pair with other Bluetooth devices. To do this, first make sure that your subwoofer is in pairing mode. You can do this by pressing the “Pair” button on the back of the subwoofer.
Once the subwoofer is in pairing mode, you can locate it on your Bluetooth device list, such as your smartphone or laptop. Once the subwoofer appears, tap/click on it to connect and the blue blinking light should turn off when it has successfully paired with the device.
After pairing, you are ready to enjoy your music with your Onn subwoofer!.
How to connect subwoofer to receiver without subwoofer output?
Connecting a subwoofer to your receiver without a dedicated subwoofer output is possible, but it will require some additional cables and certain procedures.
First, you will need an adapter cable that converts the RCA jacks on your receiver to a separate bass/subwoofer output. The other end of the cable should be two standard RCA cables for the left and right channels.
Next, you’ll need to connect this adapter cable from the line out or pre-out of your receiver to the input of the subwoofer. Usually, this will be a pair of RCA cables. If your receiver does not have line out or pre-out, then you will need an RCA Y-splitter to separate the subwoofer connection from the main outputs.
Once your cables are in place, you will need to adjust your receiver’s audio settings. In the “Audio Settings” menu, adjust the settings to ensure the subwoofer is on and the level is set to the desired level.
You may also need to adjust the crossover and other settings to ensure the best sound.
Finally, you can test out your subwoofer by playing your favorite movies and songs to ensure you have the best sound. With the right cables, settings, and adjustments, you can easily connect your subwoofer to your receiver without a dedicated subwoofer output.
Why is my wireless subwoofer not working?
This could be due to a few different things. First, you should check all of your cables and connections to make sure everything is securely plugged in and all wires are intact. Additionally, check your power source and make sure your device is receiving power.
If that is all working correctly, you may need to check your sound settings in order to make sure that your subwoofer output is correctly set. This can be adjusted within your device’s audio settings, or you may need to adjust the settings on your subwoofer itself.
Additionally, you may need to update your drivers if you are using an outdated system. If these steps do not work, you may need to replace the subwoofer itself.
Why am I not getting sound from my subwoofer?
If you are not getting sound from your subwoofer, there are a few possible causes. First, ensure that both the subwoofer and receiver/amplifier are powered on and that all connections are secure. If there is no issue with the power, check to see whether the subwoofer volume is set too low, if the phase and polarity switch is set to the appropriate setting, and if the channel configuration is properly set on the subwoofer itself.
Additionally, make sure that the amplifier has enough power for your subwoofer and that the appropriate filters and crossover settings are used for the best performance. Finally, consider what software you are using, in order to make sure that sound from the subwoofer is output and/or enabled properly.
If all of these are set properly but the sound still does not come through the subwoofer, it may be necessary to replace the subwoofer or its internal components.