How to Uninstall SCCM client using command?

The steps to uninstall the System Center Configuration Manager (SCCM) client using a command are as follows:

1. Start the command prompt as an administrator. To do this, type “cmd” in the Windows search box, right-click the “Command Prompt” result, and select “Run as Administrator”.

2. Next, you will have to navigate to the Configuration Manager client installation directory. This directory is typically located at “C:\Windows\CCM”.

3. Once you have navigated to the client installation directory, you will need to type in the following command and hit enter:

ccmsetup.exe /uninstall

4. The command will prompt you to accept agreement terms. Type “Y” and hit enter to accept them.

5. This will start the uninstallation process of the SCCM client. A command window will open and display progress updates. Wait until the process is completed, then close the window.

6. Finally, you will need to restart the computer for the changes to take effect. Once the reboot is complete, the SCCM client should be uninstalled.

How do I force SCCM client to Uninstall?

In order to force an SCCM (System Center Configuration Manager) client to uninstall, you must use the Client Action Tool to run the Client Uninstall action. You must have administrator access to use the tool.

To run the action, open the Client Actions Tool. In the menu, select Actions > Client Uninstall. This will open a window that will prompt you for the target to run the action against. Enter the name of the device that you want to uninstall the Client from, and click OK.

This will initiate the uninstall process on the specified device. When complete, the window will confirm you that the Client Uninstall action has completed.

Alternatively, you can use the command line to uninstall the SCCM client from a remote device. To do this, open the Command Prompt on the device where you have the SCCM client installed, and type:

\ccmsetup /uninstall”

This will initiate the uninstallation of the SCCM client from the remote device. Once complete,it will return a message to confirm that the command has been successfully executed.

How do I manually Uninstall SCCM?

Manually uninstalling System Center Configuration Manager (SCCM) can be a complex process. To begin the process, you should back up all data associated with SCCM. It is also recommended that you back up the Active Directory information and delete the Active Directory System Management container.

Next, you will need to uninstall the Configuration Manager components. To do this, you need to open the Add/Remove Programs control panel in Windows and uninstall any components that are related to SCCM, such as the Configuration Manager Remote Control Viewer and the SCCM Client.

Once the components are uninstalled, you should run the Configuration Manager 2012 Upgrade Readiness Tool. This will help you to identify any remaining SCCM-related files, configuration settings, and registry entries that need to be removed.

Please note that this tool will not remove any files or registry settings, but it will inform you of any that need to be removed manually.

You will next need to delete the SCCM installation folder. The default location for the folder is C:\Program Files\Microsoft Configuration Manager, however it can be different depending on how SCCM was installed.

After the folder is deleted, you should use the Regedit utility to delete all SCCM-related registry entries.

Lastly, you should delete any accounts that were associated with SCCM from Active Directory. Once these steps are completed, then you can be sure that SCCM has been uninstalled properly.

How do I force uninstall with CMD?

If you want to force uninstall a program using the Command Prompt (CMD), you have to first open the Command Prompt by navigating to the Start menu, typing “cmd” into the search bar, and hitting enter.

From there, you need to enter into the Command Prompt the command line “wmic product” followed by the name of the application that you would like to uninstall. You then need to enter the phrase “where” followed by the “name=” and then the name of the program that you want to uninstall.

Once you’ve done this, enter the command line “call uninstall” to start the uninstallation process and then “exit” to close the Command Prompt. This method is often useful if the regular uninstall method doesn’t work.

Can I uninstall a program in CMD?

Yes, you can uninstall programs in Windows Command Prompt (CMD). To do this, you first need to open the Command Prompt by typing ‘cmd’ in the search or run box in your Windows operating system. Once the Command Prompt is open, you can then use the following commands to uninstall programs:

– To uninstall a program using a Installed software list: Type “wmic product get name” and hit enter. This will list all of the programs installed on your system. To uninstall a program, type “wmic product where name= call uninstall” and hit enter.

This will uninstall the program from your system.

– To uninstall a program using its Windows Installer package: Type “msiexec /x ” and hit enter. Replace with the actual code of the program you are trying to uninstall. This command can be found on the program’s official website.

– To uninstall a program using an uninstaller: If the program has its own uninstaller file, you can type “” and hit enter. You can usually find the uninstaller file in the program’s installation folder.

In some cases, you may need to restart your computer after uninstalling a program for the changes to take effect.

How do I open SCCM in CMD?

To open SCCM (System Center Configuration Manager) in the Command Prompt, you need to check if your system has the correct configuration. First, make sure that the SCCM is installed and the relevant services are running.

Once the environment is setup, you can open Command Prompt in administrator mode and use ‘cd’ command to access SCCM installation directory. In the installation directory, enter ‘mmc’ followed by the SCCM console.

This will open the SCCM console in the Command Prompt. You can navigate to various sections and use various commands to manage the SCCM settings.

Also, be sure to have the proper permission level to access SCCM if you have multiple users on the system. With the permission level, you can access SCCM from the Command Prompt and manage the system from a single location.

How do I start SCCM from command prompt?

One way to start System Center Configuration Manager (SCCM) from the command prompt is to use the Configuration Manager Control Panel Applet (CmRcViewer. exe). This command line tool is installed with the SCCM console, and it allows you to manage various aspects of SCCM’s functionality from the command line.

To start SCCM from the command prompt, open a command line window and navigate to the folder containing the CmRcViewer. exe executable. If you have installed SCCM to its default location, this will be located at %programfiles%\Microsoft Configuration Manager\AdminConsole.

Once in this folder, enter the command ‘CmRcViewer /s’ to launch the SCCM console.

Another option is to open the folder containing Configuration Manager’s executable (CMAdminUI. exe). If you have installed SCCM to its default location, the folder can be found at %programfiles%\Microsoft Configuration Manager\AdminConsole\ bin.

Once in this folder, right-click on the CMAdminUI. exe file and select ‘Run as administrator’ to launch the SCCM console.

It is also possible to start SCCM by typing ‘configurationmanager’ into the Start menu search box. If a match is found, clicking this will open the SCCM console.

How do I force uninstall something that won’t uninstall?

If you are having difficulty uninstalling a program from your computer, there are a few possible solutions you can try, depending on your system.

First of all, try using the built-in uninstaller for the program. Depending on the program, it may be listed in the Control Panel under “Programs and Features” or “Add or remove programs”. If it is there, use the uninstaller and follow the on-screen prompts to begin the process.

Sometimes, however, a program may not have a built-in uninstaller or the uninstaller may not work correctly. In this case, you may have to use third-party uninstallers. And many come with powerful cleaning and removal tools which can help successfully remove the program from your system.

If all else fails, you may have to manually remove the program yourself. This would involve going through your computer’s system folders and deleting any associated folders and files, as well as cleaning the Windows Registry of any entries associated with the program.

It’s important to be careful when making manual changes to your system, however, as deleting the wrong files can cause your computer to stop working the way it should.

Overall, forcing an uninstall of a program can be complicated, but it’s worth the effort if the program is causing conflicts with your other programs or software.

How do I uninstall software Centre?

Uninstalling software via the Software Centre is quite simple. To uninstall a program, open the Software Centre, search for the program you want to uninstall, then select the Uninstall option from the adjacent Menu options.

When prompted, enter in the administrative password to begin the process. Once the program has been uninstalled, you may be prompted to restart your computer to fully complete the process, so be sure to save any open files or documents you are working on before proceeding.

Once the software has been uninstalled, you can check the list of installed programs in the Programs and Features window. If needed, you can also run a disk cleanup to remove any temporary files that may have been left behind.

How do I force a program to uninstall from Control Panel?

To force a program to uninstall from Control Panel, you’ll need to use the Windows Control Panel’s ‘Uninstall a program’ feature. This is typically located in the ‘Programs and Features’ category of the Control Panel.

Once in the ‘Uninstall a program’ window, you’ll be able to select the program you want to uninstall from the list of installed programs. After selecting the program, you’ll need to click on the ‘Uninstall’ button in order to begin the uninstallation process.

You may be asked to confirm your choice before the uninstallation process begins. After the uninstallation process is completed, the program will no longer be visible in the list of installed programs.

You could also try using the Windows “Add/Remove Programs” or “Programs and Features” lists directly, as this will show programs that may not be accessible through the Control Panel. Lastly, you could also use third-party programs, such as Ccleaner, Revo Uninstaller, or IObit Uninstaller to uninstall programs from the Control Panel.

These programs can help you uninstall programs quickly and completely.

What are 3 ways to remove a program from your computer?

There are three primary ways to remove a program from your computer:

1. Use the uninstall feature in the program’s folder: Most programs provide their own uninstaller, which you can find in their program folder (often located in the Start Menu or Applications folder).

To uninstall the program with its own uninstaller, run the uninstaller and follow the on-screen instructions.

2. Use an uninstaller tool: Uninstaller tools are specialized programs designed to automatically detect and remove installed programs. Popular uninstaller tools include Revo Uninstaller and IObit Uninstaller.

3. Delete the program folder: If an uninstaller isn’t available, you can sometimes delete the program’s folder to remove the program. Be aware, however, that deleting the program’s folder may not remove the program’s registry entries, and the program may still appear in Windows’ Add/Remove Programs list.

To completely remove the program from Windows’ registry, you may need to use registry-editing tools.

How do I Uninstall Configuration Manager console?

If you need to uninstall the Configuration Manager console, you will need to do the following steps:

1. Open the Control Panel.

2. Select ‘Uninstall a Program’.

3. Select the Configuration Manager Console, right click and select ‘Uninstall’.

4. A message will then appear for the Configuration Manager console uninstall process, click ‘Yes’.

5. The configuration manager console will now start to uninstall.

6. Once complete, you will be asked to restart the computer, click ‘Yes’.

7. After the computer restarts, you will have successfully uninstalled the Configuration Manager console.

How do I remove SCCM client from my computer?

Removing the SCCM client from your computer can be done relatively easily. The main task is to stop any currently running SCCM services, uninstall the SCCM client, and then delete the appropriate files and folders.

However, the exact steps needed to remove the SCCM client from your computer depends on the version of SCCM in use, as well as the version of Windows on the computer in question.

For SCCM 2007 clients:

1. Stop any running SCCM services. To do this, open the Services snap-in or administrative tool and then stop the SMS Agent Host, and Windows Management Instrumentation (WMI) services.

2. Uninstall the SCCM Client. To do this, open the Control Panel and select Add or Remove Programs. Scroll down to find the SCCM Client entry, select it and then click Change/Remove. Follow the onscreen instructions to complete the uninstall.

3. Delete the SCCM Files. Close the Add or Remove Programs dialog and then delete the following files and folders:

• C:\Windows\ccm

• C:\Windows\smscfg.ini

• C:\Program Files\Microsoft Configuration Manager

• C:\Documents and Settings\All Users\Application Data\Microsoft\Crypto\RSA\S-1-5-18

For SCCM 2012+ clients:

1. Stop any running SCCM services. To do this, open the Services snap-in or administrative tool and then stop the SMS Agent Host service.

2. Uninstall the SCCM Client. To do this, open the Control Panel and select Programs. Now select the Uninstall a Program option. Scroll down to find the SCCM Client entry, select it, and then click the Uninstall button.

Follow the onscreen instructions to complete the uninstall.

3. Delete the SCCM Files. Close the Uninstall a Program dialog and then delete the following files and folders:

• C:\Program Files\Microsoft Configuration Manager

• C:\ProgramData\Microsoft\Configuration Manager

• C:\Program Files (x86)\Microsoft Configuration Manager

• C:\Documents and Settings\All Users\Application Data\Flexera Software

• C:\Windows\ccm

• C:\Windows\smscfg.ini

• C:\Documents and Settings\All Users\Application Data\Microsoft\Crypto\RSA\S-1-5-18

Once all of the above steps have been completed, the SCCM client will be completely removed from your computer.

How do I disable SCCM service?

Disabling the System Center Configuration Manager (SCCM) service requires access to the server itself, as well as a user account with the necessary permissions to carry out this task.

First, log in to the computer running the SCCM service. Then, open the Computer Management utility by clicking the Start menu and typing ‘services.msc’ into the search bar.

In the Services list, locate the service named ‘SMS Agent Host’ and double click it. In the pop-up window, select the General tab and click the ‘Stop’ button to disable the service.

Now, navigate to the Recovery tab and select the option ‘Take No Action’ for all three failure options. This prevents the service from automatically starting after a system restart.

Finally, click ‘OK’ to save the changes and verify that the service has been disabled. You may have to restart the computer for the changes to take effect.

Where is SCCM client located?

SCCM client is typically located on the client computers it is responsible for managing. The SCCM client can be installed manually or pushed out from the SCCM server. Once installed, the client monitors the computer it is installed on and can be triggered to perform certain tasks such as software updates, application installation, and system scanning.

The SCCM client typically runs on the local computer as a system service in the background and can be accessed through the Control Panel.

Categories FAQ

Leave a Comment