When an iPhone 5s won’t turn on, there are several steps that can be taken to try and fix the issue.
First, it is important to note that the iPhone 5s does not have a physical power button, so if your iPhone does not power on there may be a different issue at hand.
The first step in troubleshooting an iPhone 5s not turning on is to try a hard reset. To do this, press and hold the Home button and the Power button at the same time for 10 seconds. If the phone begins to power up, release the buttons and allow the phone to start completely before it is used.
If a hard reset does not work, check the charging port on the phone to ensure it is not blocked by dirt or lint. Use a thin piece of wire to try and clean it out and then plug in a charger and attempt to power up the phone.
If the phone is still not starting, make sure the charger being used is compatible with the phone. Most chargers will work, however if the charger is not rated to be compatible with the phone, it may not be able to power the device properly.
In the event that none of the above steps resolve the issue, the last resort is to reset the phone’s settings. To accomplish this, make sure the phone is connected to a power source, and then press and hold the Home button and the Power button at the same time for 10 seconds.
This will cause the phone to reset to its original factory settings.
If none of the steps above resolve the issue, it may be necessary to take the phone to a certified technician who can inspect it further.
What is the cause of iPhone not turning on?
The most common issue is a drained battery or a faulty charger. If the battery has been completely drained, it may need to be recharged. Check to make sure that your charger is properly connected to your iPhone and to a power source.
If your charger isn’t working or if your iPhone isn’t responding to the charger, it may be time to buy a new one.
Other possible causes of an iPhone not turning on could be a software issue or a hardware problem. If the screen is on but the phone is not responding, try restarting the device by pressing and holding the home button and the sleep/wake button (one on either side) simultaneously until the Apple logo appears on the screen.
If the phone still won’t turn on after a restart, you may need to reset the phone to factory settings by connecting it to a computer and using iTunes. Alternatively, if the phone is still not turning on, it may be a hardware issue and the phone may need to be taken to an authorized Apple repair store for further diagnosis and repair.
How do I turn on my iPhone 5 if my power button doesnt work?
If your power button doesn’t work on your iPhone 5 and you can’t turn it on, there are a few methods you can try to get your device working.
First, try plugging your iPhone into a wall charger and see if that starts the device. If that doesn’t work, you can try connecting your iPhone to iTunes and force restart it. To do this, open iTunes and plug in your device via USB.
Now hold the Home button and the Power button simultaneously for about 10 seconds on your iPhone until you see the Apple logo and then release the buttons.
If these methods don’t work, you may need to visit an Apple Store or an authorized repair outlet to get your iPhone fixed.
How do I wake up my iPhone 5s without the power button?
If your iPhone 5s power button is not working, there are several ways that you can wake up your device without the power button.
1. Use the Home Button: You can still use the Home button to wake up your iPhone 5s instead of the power button. Simply press and hold the Home button to unlock your iPhone’s screen and to access the home screen.
2. Connect Charger or Headphones: You can connect a charger or a pair of headphones to your iPhone 5s to power up the device and wake it up if it’s in sleep mode.
3. Use Assistive Touch: Assistive Touch is an accessibility feature that allows you to access device functions without using the hardware buttons. To enable it, go to Settings > General > Accessibility > Assistive Touch.
Once enabled, you can use it to wake up your device without the power button.
4. Shake your device: If your iPhone 5s is in sleep mode, you can physically move your device to wake it up. Try gently shaking your device a few times and it will power up and display the home screen.
With the above methods, you can easily wake up your iPhone 5s without the power button.
How do you force a dead iPhone to restart?
Generally, forcing a dead iPhone to restart is relatively straightforward. Depending on the model of your device, you can try one of these two methods:
1. Hold down the sleep/wake button and the Home button at the same time for about 10-15 seconds. This will force the device to power down and restart.
2. If your device has a removable battery, begin by removing the battery from the device. After a few seconds, reinsert it and power up the device.
If neither of these steps work, it may be time to bring your device to a repair shop or Apple Store, as it could be a more serious hardware issue.
How do I manually start my iPhone?
To manually start your iPhone, begin by making sure it’s connected to a power source. If it is already connected, then you can start the device by holding down the Sleep/Wake button at the top of your iPhone until you see the Apple logo appear.
After that, you can release the button and wait for your device to boot up. If your device doesn’t start after pressing and holding the Sleep/Wake button, you may need to try connecting it to iTunes and performing a system reset.
To do this, connect your iPhone to your computer with a USB cable and open iTunes. Once it recognizes your device, you can then follow the onscreen instructions for restoring your device. If none of these methods work, then it’s possible that your device has a hardware issue and you should contact Apple for further help.
What causes black screen of death on iPhone?
The “black screen of death” on an iPhone can be caused by a variety of issues, including hardware and software problems. A hardware problem may be caused by a defect in the display, logic board, LCD connector, or battery.
Software problems may be caused by a corrupted operating system, corrupted apps, too many apps stored on the device, or a faulty update that has been installed. In some cases, the “black screen of death” can appears as a result of damage to the connector that connects the display to the logic board (known as a ribbon cable) or due to moisture or dust damage.
If the issue is hardware-related, it may be necessary to repair or replace the affected components. In the case of a software issue, it may be necessary to update the operating system, delete the apps that are causing the issue, or reinstall the faulty update.
Why did my iPhone screen go black and won’t turn on?
It is likely that your iPhone’s black screen and inability to turn on could be caused by many things. It could be a software issue or something more serious, like a hardware issue.
Software issues can arise when an iOS update is incomplete or there is a conflict with another app. It can also occur if the phone has been Jailbroken or if an incorrect system setting has been applied.
Hardware issues can arise if your battery has suddenly died, your screen has become damaged in some way, or the iPhone’s charging port, charger, or cable are defective. It could also be that the device has become flooded with water or some other liquid, which can cause the internal circuits to short out.
The best way to diagnose the problem is to run some basic troubleshooting tests. First, make sure your iPhone is fully charged. Then, try pressing and holding the power button for at least 10 seconds.
If that still doesn’t work, try connecting it to a computer or a power outlet using a lightning cable or the original charger.
If all else fails, it is best to visit an Apple store or your device’s manufacturer for further diagnostic tests or to have them fix the problem.
Why won’t my iPhone turn on even though it’s plugged in?
The first thing you should do is check your charging cable, charging block, and wall outlet for any signs of damage and make sure your phone is properly plugged in. If that looks okay, then you can try a few other things.
You can try resetting your iPhone by holding down the power and home buttons until you see the Apple logo, then let go and wait for the phone to turn on. If that doesn’t work, you can try a hard reset, which is to hold down both the home and power buttons for about 20-30 seconds until the Apple logo appears.
If neither of those options work, then you may have an issue with your iPhone’s battery and you may need to contact Apple and have it serviced.
Why is my phone not turning on at all?
First, check to make sure that your battery is charged. If your battery is dead, plug your phone into a power source and let it charge for at least 15 minutes before trying to turn it back on.
If your battery is not the problem, then your phone may need to be reset. To do that, hold down the power button and the volume down button until the device turns off. Then try to turn it back on again.
If your phone still doesn’t turn on, it’s possible that there is something wrong with the hardware, such as faulty wiring or a problem with the motherboard. In that case, you will need to take your phone to a repair shop or contact your phone’s manufacturer for further assistance.
Is a black iPhone screen fixable?
Yes, a black iPhone screen can be fixed. If you have a black screen on your iPhone, the first thing you should do is restart it by pressing and holding the sleep/wake button. Sometimes this can help resolve minor software glitches.
If the black screen persists, then you may have a hardware issue. Depending on the type and extent of the problem, it might be necessary to replace the iPhone display assembly, which includes the LCD and digitizer, in order to fix a black iPhone screen.
DIY repairs can be done with the right tools and instructions, but if you are not comfortable taking on this task, then it is recommended that you seek the help of a professional repair service.
How to do a force restart?
A force restart is used to restart your device in the event that a reset or restart does not work, or does not respond. Depending on what type of device you’re using, the instructions for doing a force restart will be different.
For Apple devices (iPhone, iPad, iPod touch, Apple Watch, Mac):
1. On devices with a Home button, such as the iPhone 6s and earlier, iPad, and iPod Touch:
Press and hold the Home and Power buttons simultaneously until the Apple logo appears (maximum 10 seconds).
2. On devices without a Home button, such as the iPhone 7 or newer, and the iPad Pro (2018):
Press and hold the Volume Up button, then press and release the Volume Down button. Then, press and hold the Power button until the Apple logo appears (maximum 10 seconds).
3. On an Apple Watch:
Press and hold both the side button and Digital Crown simultaneously until the Apple logo appears (maximum 10 seconds).
4. On all Mac devices:
Press the power button and immediately after, press and hold all four of the following keys simultaneously: Option, Command, P, and R. Keep them pressed until the Apple logo appears (maximum 10 seconds).
For all other devices:
1. The first step is to discharge any residual power that is still left in the device. The easiest way to do so is by holding the Power button down until the device fully powers down.
2. Once that is done, press and hold the Power button until the device restarts. If that doesn’t work, try pressing and holding all of the other buttons at the same time. If there are no other buttons, press and hold the Power button for 30 seconds or more.
Hopefully this guide helps you restart your device correctly. Good luck!
How much does it cost to fix a blacked out phone screen?
The cost to fix a blacked out phone screen will depend on the type of phone, the extent of the damage, and where you take it to be repaired. If you have an iPhone and the screen is completely black or won’t turn on, you could be looking at anywhere between $199 and $279 to have the screen repaired.
However, if the phone is still on but has major physical damage or liquid damage, the cost to repair it could increase. Android phones can be less expensive to repair, but it depends on the brand and model.
If you take your device to a third-party repair shop, the cost may be lower. Cost estimates can also vary depending on where you live. Generally, it is best to shop around for the best price before you commit to having any phone repair done.
Is repairing an iPhone screen worth it?
Repairing an iPhone screen can be worth it depending on the severity of the damage, the age of the phone, and the type of repair needed. If the damage is relatively minor, like a small crack in the corner, a simple repair job could be a worthwhile investment to maintain the condition of the phone.
However, if the damage is more significant, like large cracks or a shattered screen, it is likely not worth it to try and repair the device. The cost of the repair might exceed the cost of a used replacement phone, especially if the phone you’re repairing is a couple of years old.
Additionally, more complex repair jobs, like replacing the entire screen or swapping out the battery, will require professional skills and could cost more than the phone is worth. Ultimately, it’s up to you to make the decision on whether repairing your iPhone screen is worth it.